Recent Member Tested & Recommended
|
|
|
|
|
Marine Tech Safe Skeg
MSRP: $129.99
|
|
|
| Member Tested Rating: 8.9 |
|
|
|
|
| |
 |
| |
 |
|
The Safe-Skeg fits over a new outboard’s skeg to prevent damage, or can be used to repair a damaged one. It’s made of marine-grade stain-less steel and is ready to install with the included mounting hardware. Contact Marine Tech at (651) 486-2010; marinetechproducts.com. |
|
|
|
 |
MEMBER TESTED RESULTS |
 |
|
Gary Wilson, Albertville, AL
“This product works perfectly and made a big difference in handling. It really looks good on my motor, too.” |
|
Mark Karczewski, Channahon, IL
“This is a nice way to spruce up an outboard, plus it covers any dings on the original skeg.” |
|
|
|
|
Comments |
|
|
Thursday, March 29, 2012 7:03 AM
I actually have broken skeg I would like to test to see how it works
Wednesday, April 11, 2012 4:44 PM
I have a 90 hp mercury , where when i first got it and wasn"t really used to boating, where I trottled up, ground down about an inch and a half on the concrete ramp, would like try this out on my motor. Newbee
Saturday, April 21, 2012 1:03 PM
I have a very slightly bent and chiped one on my boat, makes handling a little frustrating. Would love to try this
Friday, April 27, 2012 5:40 PM
I have a small chip on my skeg. I feel I am a the person to test the Marine Tec Safe Skeg on my 25 hp Yamaha. firedogjtw
Wednesday, May 09, 2012 9:39 PM
i bought an 86 procraft fish and ski the previous owner had broke off half of the skag ithis would definately be a product i would like to test out i bet it could make big difference in the handling
Thursday, June 14, 2012 8:48 PM
I tested this! It is an awesome product. My skeg was damaged and I cut off and filed the damaged areas before installing the Safe-Skeg. Easy to install, looks great and restored my boat to handle like it used to. I highly recommend the Safe-Skeg.
Friday, July 20, 2012 12:31 AM
I tested this product also! I misplaced it but recently found it! It was VERY easy to install & looks GREAT on the Mercury engine! It also compliments the stainles steel prop!!!!!!!
Monday, August 13, 2012 8:40 PM
I recently became a member an chipped my skeg an am very interested on seeing how it works its a 15 horse evinrude
Tuesday, September 04, 2012 6:17 PM
I have a 90hp tracker marine and the skeg is broken. This is something that I would like to try for improved handling and the cost of a lower unit versus this skeg makes a big difference.
Only registered users may post comments.
|
|